Attack Hybrid 11 Mn/Pt Ski Bindings 2027

Attack Hybrid 11 Mn/Pt Ski Bindings 2027

110MM
$629.00 CAD
Skip to product information
New 2027
Ski Bindings

Attack Hybrid 11 Mn/Pt Ski Bindings 2027

$629.00 CAD
Warranty2 years
Size
1 left

This item ships for free to most of Canada. Details

Pickup available at Boutique Adrénaline, Chambly

Usually ready in 24 hours.

View store information

Attack Hybrid 11 Mn/Pt Ski Bindings 2027

110MM

Boutique Adrénaline

Pickup available, usually ready in 24 hours

965 b Boulevard de Périgny
Chambly QC J3L 4P3
Canada

+14504478933

Buy it with

Quick Specs

Ability Level Advanced
DIN Range 3-11
Stand Height 32 mm
Boot Compatibility MN/PT dual mode: alpine, walk, and touring boots in ski mode; tech-insert boots in tour mode
Weight HIKE 805 g/pc. / SKI 1,055 g/pc.
Brake Widths 95 mm, 110 mm, 130 mm

Product Description

The Attack Hybrid 11 MN/PT converts between a lightweight touring setup and a high-performance freeride binding without tools or compromise. Swap the pin toe for the FR PRO3 alpine toe and instantly shift modes for any descent. Two hiking positions (0/9 degrees), automatic brake lock, and a carbon-reinforced chassis keep weight low and confidence high on the skin track and the fall line. Built for advanced freeride skiers who do it all.

Product Details

Toe Piece FR PRO3 Toe: alpine/freeride toe delivering consistent release values across different sole heights via the adjustable AFD and horizontal spring design. Interchangeable without tools with the pin touring toe for instant mode conversion.
Heel Piece SX FR Heel
Tour Mode Two hiking positions (0/9 degrees). Automatic brake lock in hike mode. Brake locking lever prevents accidental step-in when brake is closed in ski mode.
Boot Compatibility MN mode (FR PRO3 alpine toe): Alpine (ISO 5355 Type A), Walk (ISO 23223 Type A), Touring (ISO 9523). AFD height adjustment required; verify with boot height adjustment tester. PT mode (pin touring toe): Walk (ISO 23223 Type A), Touring (ISO 9523), and boots with tech inserts. Tech insert compatibility may vary; verify manufacturer recommendations.
Anti-Friction Device Adjustable AFD on the MN (alpine) toe. Height must match boot sole height and be verified with the boot height adjustment tester.
Brakes 95 mm, 110 mm, 130 mm
Construction Lightweight chassis with approximately 30% carbon fiber instead of conventional glass fibers. More than 50% of plastic parts sourced from renewable raw material.
Weight HIKE 805 g/pc. / SKI 1,055 g/pc.
Additional Features Attack Demo
Design Credit Hedvig Wessel, Jessica Hotter, Abel Moga, Jonathan Rollins

Product Specs

Brake Width
95 mm [O]
110 mm [O]
130 mm [O]

Attack Hybrid 11 Mn/Pt Ski Bindings 2027 FAQ

What does MN/PT mean, and which boots actually work with this binding?

The Attack Hybrid 11 ships with two interchangeable toes. In alpine mode (MN, Multi-Norm), it accepts Alpine (ISO 5355 Type A), Walk/GripWalk (ISO 23223 Type A), and Touring (ISO 9523) boots, with AFD height adjustment required. In touring mode (PT, Pin Technology), your boots must have tech inserts. Both toe units are included and swap without tools.

How hard is it to switch between touring and alpine mode on the mountain?

The swap is tool-free. Pull the pin touring toe, clip in the FR PRO3 alpine toe, and the binding converts from a full touring setup to a freeride binding. Tyrolia describes the process as requiring no tools or compromise. You do not need to remove the binding from the ski to make the switch.

I also want to use this at the resort: will DIN 3-11 cover me on piste?

DIN 3–11 covers Advanced-level skiers across a wide range of weights and abilities. If your calculated DIN sits at 9 or above, you are near the ceiling for aggressive piste skiing. Heavier or very hard-charging skiers who need maximum retention at the resort would be better served by the Attack Hybrid 14 MN/PT, which runs DIN 4–14.

The stand height is 32 mm: will that feel strange compared to my regular alpine binding?

At 32 mm, the stand height is noticeably higher than a standard alpine binding, which typically runs 15–22 mm. This is a characteristic of hybrid touring bindings: the taller stack accommodates the touring mechanism and interchangeable toe units. Factor this in if you are sensitive to platform height or prefer a low, direct feel underfoot.

What are the hiking positions, and will the brakes stay out of the way while I climb?

The Attack Hybrid 11 offers two heel lift positions: flat (0°) and 9°. An automatic brake lock raises and holds the brakes during the climb; a brake locking lever prevents stepping into the heel accidentally when the brake is closed. Once you step in for the descent, the brakes return to active ski mode.

What does the carbon construction actually change in terms of weight?

Tyrolia builds the Attack Hybrid with approximately 30% carbon fiber replacing standard glass fiber, plus more than 50% of plastic parts from renewable raw material. In ski mode with the alpine toe, the binding weighs 1055 g per piece; swap to the pin toe and it drops to 805 g for the climb. The carbon blend keeps touring weight low while maintaining freeride-level rigidity on the descent.

Can I run regular alpine boots without ever using the touring function?

Yes. In alpine mode the FR PRO3 toe accepts standard alpine, GripWalk, and touring-norm boots, so you can run the Attack Hybrid 11 as a pure freeride binding. Keep in mind that the 32 mm stand height and 1055 g ski-mode weight are inherent touring-binding characteristics that a dedicated alpine binding would not carry.

Related products